Category: Windows / Others

License: Freeware

Limitations :

OS: Windows All

Size: 2.93 MB (3,067,902 bytes)

Introduction: Dielectric Test is a software application that Records test parameters and loads them via an IEEE interface. Here are some key features of "Dielectric Test": · This Dielectric Test software was written to create download and store test parameters required for the testing of insulation using a · Sefelec Dielectric unit to test ground continuity and current leakage. · Programm download in this version is effected via a IEEE card interface. · Up to 3 Test units may be controlled via the software and setting the · Primary Address of Device. · The Card Installed tick box top left corner should be set if IEEE card is · fitted to PC and Dielectric Test unit Connected. · Test Programmes to load are selected via the right hand window. · The software can be in either programmer or operator mode. · In programmer mode Command lines 1 and 2 can be changed and test programmes added or deleted. · In Operator Mode Programmes to load and the interface may be chosen but test parameters cannot be altered. · Selecting the Operator / Programmer button alternates the the user between Operator and programmer by the use of a password. · Initial password set to password. · In this mode the password may be changed Via Change Password. · Tests may be added or Deleted via the Add/Find and Delete buttons. · Data loaded to the test unit via the IEEE card is entered into Commands · Lines 1 and 2. · The Test Instructions field is intended for user test guidence comments.